|
 |
 |
20 Litre S-Can
Specifications
| Size : |
230mm x 78mm Dia. |
| Weight : |
0.3 Kg |
| Material : |
Aluminium alloy |
| Water Capacity : |
0.98 litres |
| Filling Pressure : |
300 psi (20 Bar) |
| Usable Gas : |
20 litres |
| Outlet : |
7/16" 28NS/2 ma |
| Filling Tolerance : |
5-99ppm +/- 10%, >100ppm +/- 5% |
| Transport : |
UN 1956 Class 2 |
| Mixtures : |
Non-reactive andlimited range of reactive mixtures available |
|
|
 |
110 Litre S-Can
Specifications
| Size : |
360mm x 88mm Dia. |
| Weight : |
1.4 Kg |
| Material : |
Aluminium alloy |
| Water Capacity : |
1.72 litres |
| Filling Pressure : |
1000psi (68 Bar) |
| Usable Gas : |
110 litres |
| Outlet : |
5/8" - 18 UNF (C10) |
| Filling Tolerance : |
5-49ppm +/-10%
50-500ppm +/-5%
>500ppm +/-2% |
| Transport : |
UN 1956 Class 2 |
| Mixtures : |
Reactive mixtures with longer stability
than S-Can20 |
|
|
 |
S-Reg
Flow Control Regulator c/w pressure gauge for use with 34, 58 & 105 Litre
cylinders.
Specifications
| Flow Rate Factory set @ |
0.3, 0.5, 1.0, 1.5, 2.5, 3.0 lpm |
| Pressure Gauge |
0-1000 psi |
| Inlet |
5/8" - 18 UNF (C10) Male |
| Outlet |
6mm Barbed fitting |
| Material |
Nickel coated brass (Stainless steel regulators available for very Reactive gases) |
|
|
 |
S-Flow
Control Valve and Flow Indicator for use with 5, 12 & 20 Litre can.
Specifications
| Flow Rate Nominally |
0.5 lpm on bottom line
1.0 lpm on top line |
| Material |
Brass/Perspex
|
|
|
 |
MultiReg
Flow Control Regulator c/w pressure gauge for use with 34, 58 & 105 Litre
cylinders.
Specifications
| Flow Rate increments |
0, 0.3, 0.5, 0.7, 0.9, 1.2, 1.5, 2.0, 2.5, 3.0 lpm |
| Pressure Gauge |
0-300 bar |
| Material |
Nickel coated brass |
|
|
|
|
Web hosting | Website builder by Ninenic
