PVC insulation. Copper conductors 2 x 1.5 mm².
Nominal outer dimensions 7 x 9.5 mm. Suitable for low temperature applications.

Application: Construction and refrigeration

• Minimum bend radius at –15ºC: 20 mm
• Heating conductor element: Nickel - Chromium
• Distance between contacts: 1000 mm
• Maximum insulation temperature: 70 ºC

Suitable for avoiding ice in pipes and metal surfaces or for
heating not exceeding 55ºC on them. It can be cut to size.
They are commonly used in industrial or commercial refrigeration
installations to avoid ice in the drain pipes, condensation
on the surface, and in applications on metal surfaces not
exceeding 55°C.

Application: Refrigeration

• Minimum bend radius at –25ºC: 20 mm
• Heating conductor element: Nickel - Chromium
• Distance between contacts: 1000 mm
• Maximum circuit length: 60 m
• Maximum operating temp. (connected): 55ºC
• Maximum exposure temp. (disconnected): 70ºC

Up to 180ºC with silicone insulation.

PVC insulation. Copper conductors 2 x 1.5 mm². . Nominal
outer dimensions 7 x 9.5 mm. Suitable for low temperature
applications.

Application: Construction and refrigeration

• Minimum bend radius at –25ºC: 20 mm
• Heating conductor element: Nickel - Chromium
• Distance between contacts: 1000 mm
• Maximum circuit length: 70 m
• Maximum exposure temperature (disconnected): 70ºC

Up to 70ºC with metal protection braid.

A range with braid, giving mechanical and electrical protection
by using it as an earth conductor. It can be cut to size.
They are commonly used in industrial or commercial refrigeration
installations to avoid ice in the drain pipes, condensation
on the surface, and in applications on metal surfaces not
exceeding 55°C.

Application: Refrigeration

• Minimum bend radius at –25ºC: 20 mm
• Heating conductor element: Nickel - Chromium
• Outer dimensions: 8.2 x 5.7 mm
• Maximum circuit length: 60 m
• Maximum operating temperature (connected): 55ºC
• Maximum exposure temperature (disconnected): 70ºC

Up to 180ºC with metal protection braid.

A range with braid, giving mechanical and electrical protection
by using it as an earth conductor. It can be cut to size.
They are usually used in heating to maintain the temperature
of pipes, tanks, etc. in protection against freezing, maintaining
process temperatures of up to 165 °C and especially in
areas that are not corrosive or atmospheres classified as
potentially explosive.

Application: Industry and construction

• Minimum bend radius at –40ºC: 20 mm
• Heating conductor element: Nickel - Chromium
• Outer dimensions: 6.9 x 9.4 mm
• Maximum operating temp. (connected): up to 165ºC
• Maximum exposure temp. (disconnected): 180ºC