หน้าแรก บริษัท สินค้าตามการใช้งาน Sitemap/ คู่มือ /FAQ/  ติดต่อ / สมัครงาน
 English
-A +A
ข้อมูลบริษัท
แผนที่
ห้องแสดงสินค้า
งานตู้แช่เย็น
งานห้องเย็น
งานห้องเย็นอุตสาหกรรม
แนะนำการใช้งานสินค้า
Site Map
คำถามบ่อยฯ / FAQ
เวบไซท์ Link
XWEB Sites (เฉพาะพนักงาน)
คู่มือ Dixell
Catalogues
สนใจติดต่อ
สมัครงาน
 www.dixellasia.com
  Search   
 








Airflow cone

Applications : air velocity, air flow and temperature Supplied with transport case and calibration certificate

Hotwire anemometer cones :

  • Cone K35 : 10 à 400 m³/h - 200 x 200 x 300 mm
  • Cone K75 : 30 à 750 m³/h - 300 x 300 x 470 mm
Measurement :

The direction and teh homogeneity of the incoming and outcoming air flow are often disrupted be the geometry of the HVAC grills. Therefore, It is necessary to canalize the flow to the sensing element of the probe.

Technical data sheets ....(868 kb)


 

Airflow cone for vane 100 mmm

Air flow cone for diameter 100mm vane probe.

Measurement :

The direction and teh homogeneity of the incoming and outcoming air flow are often disrupted be the geometry of the HVAC grills. Therefore, It is necessary to canalize the flow to the sensing element of the probe.

Technical data sheets ....(868 kb)






 

AMI 310 

AMI 310 measures, records up to 500 campaigns of 20000 points a day on a SD card and can restaure on PC via USB until 6 simultaneous parameters according to the applications: Pressure, Temperature (Pt100 and thermocouple), Humidity, Air Quality ( CO / CO2), Air Velocity and Airflow (vane probes and hotwire), Tachometry.

Precise and friendly, AMI 310 have a big color display to simplify the navigation in menus.

A Li-ion rechargeable battery (via sector or USB), gets an autonomy of 16 hours with the pressure module.

All probes and modules of our new range are compatible with AMI 310 and are automatically recognized by the device (SMART 2014 system)

AMI 310 can easily be transformed into micromanometer, thermo-hygrometer, co-meter or thermometer.

Measuring range :

  • Pressure module
  • Hotwire
  • Vane probe Ø 70 and 100 mm
  • Vane probe Ø 14 mm
  • Hygrometry / Temperature probe
  • K,J,T class1 thermocouple probes
  • Pt100 Smart-plus probe
  • Climatic conditions module
  • Air quality probes
  • Multifunction probe
  • Omnidirectionnal probe
  • Tachometry probe
  • Gas leak probe

Technical data sheet (2.02 Mb)



 

DBM 610 Airflow meter

A solution for airflow commissioning and balancing.

To check air volume of your diffusers and grilles.

Technical features :

  • Measuring range: from 40 to 3500m3/h or from 24 to 2060 cfm
  • Quick and simple hood changes
  • Simultaneous display of airflow and temperature
  • Automatic detection of airflow direction (supply and exhaust)
  • Thermo-anemo-manometer functions

Avaliable Hoods : 4 others hoods are available as options:

  • 1020 x 1020 mm
  • 720 x 720 mm
  • 720 x 1320 mm
  • 420 x 1520 mm
Functions :
  • Simultaneous display of airflow and temperature
  • Automatic airflow direction (extraction or air blast)
  • Automatic averaging or point by point averaging
  • HOLO function
  • Removable measuring unit (micromanometer fuction)
  • Data pocessing on computer with USB port
  • Different languages available

Technical data sheets ....(980.3kb)


LV 110/LV111/LV117 Thermo-anemometer with vane probe

Wired probe, hold-min-max functions, adjustable automatic shut-off, adjustable backlight. IP54 ABS housing.

  • LV 110 : Ø100 mm vane probe.
  • LV 117 : Ø70 mm vane probe.
  • LV 111 : Ø14 mm vane probe.

Airflow calculation, airflow calculation with cone (LV 110/117), automatic average, detection of flow direction.

Measuring ranges :

  • LV 110 : 0,3 to 35 m/s
  • LV 117 : 0,4 to 35 m/s
  • LV 111 : 0,8 to 25 m/s
  • Temperature : 0 to +50°C
  • Airflow : 0 to 99 999 m3/h

Functions

  • Airflow calculation
  • Airflow calculation with cone (LV 110/117)
  • Automatic aberage
  • Selection of units (air belocity, airflow and temperature)
  • Hold function
  • Display of minimum and maximum values
  • Configurable auto shut-off
  • Backlight
  • Detection of flow direction (LV 110/117)
  • Selecetion of the type of cone
  • Dimensions of rectangular and circular duct

Technical data sheets ....(729kb)

 


LV 130

Integrated probe, hold-min-max functions, adjustable automatic shut-off, adjustable backlight. IP54 ABS housing.

Airflow calculation, airflow calculation with cone, automatic average, detection of flow direction.

Measuring ranges :

  • Air velocity: 0,3 to 35 m/s
  • Airflow: 0 to 99 999 m3/h
  • Temperature : 0 to +50°C

Functions

  • Airflow calculation
  • Airflow calculation with cone
  • Automatic aberage
  • Selection of units (air velocity, airflow and temperature)
  • Hold function
  • Display of minimum and maximum values
  • Adjustable auto shut-off
  • Backlight
  • Detection of fiow direction

Technical data sheets ....(817kb)

 


MP 210 Micromanmeter

The micromanometer MP210 was developed for the implementation and the control of the systems of heating, ventilation, air conditioning as well as for air systems balancing.

Thanks to his pressure modules, he allows to control effectively the sealing of the air-conditionings systems filters.

Accepting the Pitot probes (compensated in temperature), the MP210 is also reliable to measure air velocity and airflow in ducts. Supplied with magnet in the back of the device,it offers more freedom for the operator duringCTA’s control operations for example.

The MP210 is proposed according to 5 differencial pressure modules

  • MPR 500 : -500 to +500 Pa
  • MPR 2500 : -2500 to +2500 Pa
  • MPR 10 000 : -10 000 to +10 000 Pa
  • MPR 500 M : -500 to +500 mbar
  • MPR 2000 M : -2000 to +2000 mbar

All the pressure modules propose a thermocouple entry for the speed in Pitot compensated in temperature measurement.

Optional, the MP210 accepts various measurement probes (wired or radio link):

  • Vane probes or hotwire
  • CO probe
  • Gas leak probe
  • Tachometry probe
  • 4 channels Thermocouple module

Technical data sheets ....(1,531 kb)

 


VT110 / VT115

Wired probe, hold-min-max functions, adjustable automatic shut-off, adjustable backlight. IP54 ABS housing.

  • VT 110 : standard hotwire
  • VT 115 : telescopic hotwire bent at 90°

Airflow calculation, airflow calculation with cone, automatic average, detection of flow direction.

Measuring range :

  • Air velocity : 0,15 to 30 m/s
  • Temperature : 0 to +50°C
  • Airflow : 0 to 99 999 m3/h

Technical data sheets ....(751 kb)

 


VT 210

Specially designed for the control of the ventilation systems, the VT 210 allows to measure the air velocity, the airflow and the temperature in duct.

Multifunction device, it offers the possibility of measuring several parameters at the same time. According to your application, the VT 210 accepts, besides speed measurement probes (vanes, hotwire or omnidirectionnal), a hygrometry probe or climatic condition and temperature module.

Several packs are available according to your applications:

  • With vane probe (100mm / 70mm / 14mm) telescopic tilting in 90 ° or standard
  • With telescopic hotwire probe tilting in 90 ° or standard
  • Optional: wired or radio temperature probe and humidity probe


Measuring range :

  • Velocity : from -5 to 35 m/s
  • Airflow : from 0 to 99 999 m3/h
  • Integrated temperature of measurement probes : -20 to 80°C
  • Thermocouple temperature : see temperature probes datasheet.

Technical data sheets ....(1,589 kb)

 



หน้าแรก | บริษัท | สินค้าตามการใช้งาน | Sitemap/ คู่มือ /FAQ/  | ติดต่อ / สมัครงาน  
  Web hosting | website builder |เว็บไซต์สำเร็จรูป by ninenic ©Copyright 2002-2018 All rights reserved.
บริษัท ดิคเซลล์ (เอเซีย) จำกัด
2893, 2895 ถนนพัฒนาการ (ซอยพัฒนาการ 53/1 เยื้อง เขตสวนหลวง) เขตสวนหลวง กรุงเทพฯ 10250
Tel : 02 722 0245-9 Fax: 0 2320 2520
Email : dixell@dixellasia.com