หน้าแรก บริษัท สินค้าตามการใช้งาน Sitemap/ คู่มือ /FAQ/  ติดต่อ / สมัครงาน
 English
-A +A
ข้อมูลบริษัท
แผนที่
ห้องแสดงสินค้า
งานตู้แช่เย็น
งานห้องเย็น
งานห้องเย็นอุตสาหกรรม
แนะนำการใช้งานสินค้า
Site Map
คำถามบ่อยฯ / FAQ
เวบไซท์ Link
XWEB Sites (เฉพาะพนักงาน)
คู่มือ Dixell
Catalogues
สนใจติดต่อ
สมัครงาน
 www.dixellasia.com
  Search   
 









The LogTag Remote Probe Temperature Recorder measures and stores up to 8000 temperature readings over -40°C to +99°C (-40°F to +210°F) measurement range.

Using the LogTag Interface and LogTag’s freely available companion software LogTag Analyser , the LogTag is easily set-up for recording conditions including delayed start, sampling interval, number of readings, continuous or fixed number of readings and configuration of conditions to activate the ALERT indicator.

Readings are downloaded using LogTag Analyser which provides facilities for charting, zooming, listing data statistics and allows exporting the data to other applications such as Excel.

 


Highlights 

  • Alert indicator – indicates if readings are outside of preset limits
  • OK indicator indicates if still recording and if readings within configured limits
  • Inspection mark in log by push button
  • Push Button Logging start with optional delayed start or specific Time & Date start
  • Rapid Download! Takes only seconds to download recordings
  • ‘Pre-Start’ logging - Logtag can be configured to record even if it has not been started.
  • High performance at low cost
  • Credit card sized case – thin enough to be easily mailed “letter rate”.
  • Real time clock records time & temperature simultaneously
  • Easy to use LogTag Analyser software that runs on any PC configures LogTag for recording then downloads resulting data for analysis. Data can also be exported to fomats compatible with other applications such as Excel
  • Re-calibration to achieve higher accuracy possible
  • High quality gold plated remote sensor connector
  • Interchangeable Remote Probes – LogTag remote temperature probes are interchangeable provided they are changed with LogTag ST100 type remote temperature sensors.

 >> PDF Product Datasheet



Tipped probe

The tipped probe incorporates a 140mm exposed length of 5mm OD 316 stainless probe without handle but with small over mold to improve resistance to moisture and provide cable strain relief.
All materials at probe end of cable are FDA food rated including the cable.
Supplied standard (part# ST100HT-15)  with 1.5m (4’11”) or 3.0m (9’10”) cable terminated to MCX plug for plugging into LogTag TREX.


Handled probe

The standard handled probe incorporates a 70mm long shaped overmolded handle with a 105mm length 5mm OD (slightly greater than 3/16”) 316 stainless probe. All materials at probe end of cable are FDA food rated including the cable.
Supplied standard (part# ST100H-15) with 1.5m (4’11”) or 3.0m (9’10”) cable terminated to MCX plug for plugging into LogTag TREX.


Bare probe

Bare sensor without stainless sheath ready for fitting to custom probe assembly.
Not rated for food contact or environmentally rated.
Supplied standard (part# ST100B-15) with 1.5m (4’11”) or 3.0m (9’10”) cable terminated to MCX plug for plugging into LogTag TREX.


Model   TREX - 8
Remote Sensor Measurement Range   -40°C to +99°C  (-40°F to +210°F)
Recording Operating Temperature Range   -40°C to +85°C  (-40°F to +185°F)
Resolution   < 0.1°C for -40°C to +40°C,
< 0.2°C for +40°C to +80°C
Accuracy   With recorder case sitting in environmental temperature between 0°C to 50°C the rated accuracy is  :- ±0.5°C for -10°C to +40°C
better than ±0.7°C for -10°C to -30°C & +40°C to+60°C
better than ±0.8°C for -30°C to -40°C & +60°C to +80°C
better than ±1.0°C  for +80°C to +99°C
Capacity   8032 readings (16K bytes memory)
Sampling frequency   adjustable, 30 sec to several hours
Logging start options   Push button start or specific date & time.
Recording indication   Flashing ’OK’ indicator flashing ’Alert’ indicator.
Download Time   Typically with full memory (8000 readings) in less than 5 secs depending on computer or readout device used.
Environmental   IP61
Power source   3V Lithium battery
Battery life   2 - 3 years of normal use (based on 15 minute logging, download data monthly.
Size   86mm(H) x 54.5mm(W) x 8.6mm(T)
Weight   35g
Case Material   Polycarbonate
Standard remote sensor cable lengths   Standard: 1.5m (4’11”)
Extended: 3 m (9’10”) (recommended maximum)
Remote Sensor Cable Type   PTFE (FDA food contact rated) coaxial
Other features   • Logging start by push button or specific date/time start
• Optional clearing of alert indication by push button (places inspection make at same time).
• Download inspection mark recorded in LogTag memory every time LogTag is downloaded.
• ’Prestart’ fail-safe logging (records temperature data even if not started)
• Low Battery indication in software.
• Comprehensive Alert indicator configuration.
• Calibration to achieve higher accuracy possible.

Note:

1. Resolution & Accuracy are rated values - actual product performance may be substantially better than figures stated.
2. LogTag ST100 remote proves are designed and calibrated for interchangeability with TREX loggers to the standard rated accuracy of the product. If a TREX/ST100 probe combination is calibrated to a higher level of accuracy (as is possible) then care should be taken to always use the same TREX/ST100 combination for measurements as the ST100 sensor is not rated interchangeable at accuracies better than the TREX/ST100  rating in this specification.

 


EMC Compliance   Tested and complies with EC EMC directives
(EN 50081-1:1992 & EN 61000-6-1:2001)
see
LogTag CE mark EMC declaration of conformance

Tested and complies FCC Part 15 Subparts A and B.
see
LogTag FCC EMC declaration of conformance
FDA CFR21 Part 11 Compliance
  Designed for FDA CFR21 Part 11 Digital signatures
  Manufactured to meet the European RoHS Directive
The RoHS Directive stands for "the restriction of the use of certain hazardous substances in electrical and electronic equipment". This Directive bans the placing on the EU market of new electrical and electronic equipment containing more than agreed levels of lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyl (PBB) and polybrominated diphenyl ether (PBDE) flame retardants.

 


 



หน้าแรก | บริษัท | สินค้าตามการใช้งาน | Sitemap/ คู่มือ /FAQ/  | ติดต่อ / สมัครงาน  
  Web hosting | website builder |เว็บไซต์สำเร็จรูป by ninenic ©Copyright 2002-2018 All rights reserved.
บริษัท ดิคเซลล์ (เอเซีย) จำกัด
2893, 2895 ถนนพัฒนาการ (ซอยพัฒนาการ 53/1 เยื้อง เขตสวนหลวง) เขตสวนหลวง กรุงเทพฯ 10250
Tel : 02 722 0245-9 Fax: 0 2320 2520
Email : dixell@dixellasia.com