หน้าแรก บริษัท สินค้าตามการใช้งาน Sitemap/ คู่มือ /FAQ/  ติดต่อ / สมัครงาน
 English
-A +A
ข้อมูลบริษัท
แผนที่
ห้องแสดงสินค้า
งานตู้แช่เย็น
งานห้องเย็น
งานห้องเย็นอุตสาหกรรม
แนะนำการใช้งานสินค้า
Site Map
คำถามบ่อยฯ / FAQ
เวบไซท์ Link
XWEB Sites (เฉพาะพนักงาน)
คู่มือ Dixell
Catalogues
สนใจติดต่อ
สมัครงาน
 www.dixellasia.com
  Search   
 









The LogTag Dry Ice “Probe-less” Temperature Recorder operates, measures and stores up to 8000 temperature readings in temperature environments ranging from -80°C to +40°C (-112°F to +104°F).

Intended for use in transit monitoring of articles stored in packaging incorporating dry ice cooling agents.

Available in single trip (SRIL-8) and multiple trip (TRIL-8) versions.

Using the LogTag Interface and LogTag’s freely available companion software LogTag Analyser , the LogTag Dry Ice Temperature Recorder is easily configured for recording conditions including delayed start, sampling interval, number of readings and configuration of conditions to activate the ALERT indicator.

The Red Alert indicator provides an immediate indication, without access to a PC, if any readings are outside the limits specified at the time the unit was configured.
Green OK indicator provides immediate visual confirmation, without access to a PC, that the unit is operating.


Readings are downloaded using LogTag Analyser which provides facilities for charting, zooming, listing data statistics and allows exporting the data to other applications such as Excel.
The product incorporates an external temperature sensor uniquely arranged in a recess in the case. This arrangement protects the sensor from physical damage while retaining the faster response time normally
associated with remote sensors.


Highlights 

  • Alert indicator – indicates if readings are outside of preset limits
  • OK indicator indicates if still recording and if readings within configured limits
  • Inspection mark in log by push button
  • Push Button Logging start with optional delayed start or specific Time & Date start
  • Rapid Download! Takes only seconds to download recordings
  • ‘Pre-Start’ logging - Logtag can be configured to record even if it has not been started.
  • High performance at low cost
  • Credit card sized case – thin enough to be easily mailed “letter rate”.
  • Real time clock records time & temperature simultaneously
  • Easy to use LogTag Analyser software that runs on any PC configures LogTag for recording then downloads resulting data for analysis. Data can also be exported to fomats compatible with other applications such as Excel
  • Re-calibration to achieve higher accuracy possible

PDF Product Datasheet


Specifications
Model   TRIL-8 (Multi-use : 3 trips)
SRIL-8 (Single use)
Measurement Range   -80 ~ +40°C  (-112°F ~ +104°F)
Resolution   < 0.1°C for -80°C ~ 0.0°C,
< 0.2°C for 0.0°C ~+20°C
< 0.5°C for +20°C ~+40°C 
Accuracy   Better than ±1°C for -30°C~ +20°C
better than ±1.2°C for -45°C~ -30°C & +20°C~+40°C
better than ±1.7°C  for -80°C~--40°C
Sensor reaction time   typically less than 5 minutes(T90) in moving air (1m/s).
Capacity   8000 temperature readings (16Kbytes memory)
Sampling frequency   adjustable, 1~60 minutes or 1~18 hours
Logging start options   Push button start or specific date & time.
Recording indication   Flashing ’OK’ indicator flashing ’Alert’ indicator.
Download Time   Typically with full memory (8000 readings) in less than 5 secs depending on computer or readout device used.
Environmental   IP65 (roughly equivalent to NEMA 4)
Power source   3V low temperature chemistry Lithium battery.
Battery life   Minimum storage life of 12 months before ‘start’.
Single use version rated for a typical trip of 2 weeks duration at dry ice temperatures.
Limited use version rated for up to 3 trips of up to 2 weeks duration at dry ice temperatures over a 2 year period.
Size   86mm(H) x 54.5mm(W) x 8.6mm(T)
Weight   35g
Case Material   Polycarbonate
Other features   • Optional clearing of alert indication by push button (places inspection make at same time).
• Download inspection mark recorded in LogTag memory every time LogTag is downloaded.
• ’Prestart’ fail-safe logging (records temperature data even if not started)
• Low Battery indication in software.
• Comprehensive Alert indicator configuration.
• Calibration to achieve higher accuracy possible.
Note: Resolution & Accuracy are rated values - actual product performance may be substantially better than figures stated.

Standards compliance
EMC Compliance Tested and complies with EC EMC directives (EN 50081-1:1992 & EN 61000-6-1:2001)
see
LogTag CE mark EMC declaration of conformance

Tested and complies FCC Part 15 Subparts A and B.
see
LogTag FCC EMC declaration of conformance
FDA CFR21 Part 11 Compliance
Designed for FDA CFR21 Part 11 Digital signatures
Manufactured to meet the European RoHS Directive
The RoHS Directive stands for "the restriction of the use of certain hazardous substances in electrical and electronic equipment". This Directive bans the placing on the EU market of new electrical and electronic equipment containing more than agreed levels of lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyl (PBB) and polybrominated diphenyl ether (PBDE) flame retardants.

 



หน้าแรก | บริษัท | สินค้าตามการใช้งาน | Sitemap/ คู่มือ /FAQ/  | ติดต่อ / สมัครงาน  
  Web hosting | website builder |เว็บไซต์สำเร็จรูป by ninenic ©Copyright 2002-2018 All rights reserved.
บริษัท ดิคเซลล์ (เอเซีย) จำกัด
2893, 2895 ถนนพัฒนาการ (ซอยพัฒนาการ 53/1 เยื้อง เขตสวนหลวง) เขตสวนหลวง กรุงเทพฯ 10250
Tel : 02 722 0245-9 Fax: 0 2320 2520
Email : dixell@dixellasia.com