 |
Hand pumps for sucking, transfilling or dosing of liquids like brake fluid, Diesel, oil, or water.
At our series "HAP xxx" the double adaptor at the transfilling pump cylinder enables the user to transfill liquids in one go.
By pulling the pump handle the liquid will be sucked into the pump cylinder and by pushing the pump handle the liquid will be pressed out off the pump cylinder.
A footplate at the types 600 F and 300 F makes pumping easier by using both hands.
Our series "HAP-02 xxx" has only one adaptor which makes this type usable for sucking or filling.
Our series "HDP xxx" is made of clear PLEXIGLAS ans has a ml- scale on the body, wich make it usable for measuring
sucked liquid or dosing liquid to be filled.
ATTENTION ! All these pumps can NOT be used for fuel, acids , or Alkaline liquids !!
|
 |
|
HAP21C
- manual barrel pump for oil, brake fluid and other non flammable and non aggressive fluids
- pump connection: 1/4 SAE
- barrel connection: rubber conus 40/25
- sucking connection: 1/4" BSP
- pump volume: 420 ml per hub
- reachable pressure:30 bar
- weight: 500 g
Accessories:
- pump rubber conus 50/35
- 3 tube rubber conuses: 30/15; 40/20; 50/35
- tube 900 mm, with 1/4 SAE connection (yellow, blue or red)
- tube, PVC clear, 1.000 mm with 1/4" BSP
Example of use “Service refrigeration compressor”:
The compressor oil is pumped out from the canister into the crankcase,
without letting air or humidity into the circuit of the refrigerator.
An evacuation of the refrigeration compressor is not necessary.
Download Data sheet HAP21
|
 |
 |
HAP 125
- hand operated transfilling pump with double connector
- volume approx. 125 ml / hub
- 2 hoses each 500 mm
- sucking side with female nut G 3/8 BSP and adaptor for hoses with inner diameter 10/15 mm
order code: • P-HAP125_S
|
|
HAP 250
- hand operated transfilling pump with double connector
- volume approx. 250 ml / hub
- 2 hoses each 500 mm
- sucking side with female nut G 3/8 BSP and
adaptor for hoses with inner diameter 10/15 mm
order code: P-HAP250_S
|
|
HAP 600
- hand operated transfilling pump with double connector
- volume approx. 600 ml / hub
- 2 hoses each 500 mm
- sucking side with female nut G 3/8
BSP and adaptor for hoses with
inner diameter 10/15 mm
order code: P-HAP600_S
|
|
HAP600 F
- hand operated transfilling pump with double connector
- baseplate
- volume approx. 600 ml / hub
- 2 hoses each 500 mm
- sucking side with female nut G 3/8
- BSP and adaptor for hoses with
inner diameter 10/15 mm
order code: P-HAP600_F |
|
HAP 3000 F
- hand operated transfilling pump with double connector
- baseplate
- volume approx. 3000 ml / hub
- 2 hoses each 500 mm
- sucking side with female nut G 3/8
BSP and adaptor for hoses with
inner diameter 10/15 mm
order code: P-HAP3000_F
|
 |
|
HAP 02
- hand operated sucking pump
- made of aluminium and ABS
- deliverable in 4 sizes
- volumes 125, 250, 600 or 1.000 ml
- clear PVC hose, 1 m
- delivered in box
| Type |
order code |
ml. |
| HAP 02 -125 |
P-HAP 02 -125 |
125 |
| HAP 02 -250 |
P-HAP 02 -250 |
250 |
| HAP 02 -600 |
P-HAP 02 -600 |
600 |
| HAP 02 -1000 |
P-HAP 02 -1000 |
1000 |
|
| |
|
 |
HAP 20 Barrel extraction pump, made of aluminium
Suitable for use with fluids such as Diesel, oils, coolant, water, etc.
• With integrated filter
• Height adjustable
For the extraction process, insert the vacuum pipe into the opening of the container (canister, drum)until it reaches the bottom. The pump is supplied with a vertically adjustable foot, permitting use with containers of a variety of sizes. The manually operated pump, withan integrated filter in the suction pipe, can be used with openings of 45 mm in diameter and upwards.
order code: P-HAP_20
|
| |
|
 |
 |
HDP
- hand operated dosing pump with
plexiglass body
- scale on body in ml
- made of plexiglass and aluminium
- deliverable in 3 sizes
- volumes 125, 500 or 1.000 ml
- clear PVC hose, 1 m
- delivered in box
| Type |
order code |
ml. |
| HDP 125 |
P-HDP 125 |
125 |
| HDP 500 |
P-HDP 500 |
500 |
| HDP 1000 |
P-HDP 1000 |
1000 |
|
 |
|
HAPA
Adapter for
HAP 02-xxx und HDP xxx
These adapters will enable you to do yourjob even in tight or hidden places easily.
While using the adapter the tubeconnection of the hand pumpwill be replaced by the required HAP adapter(HAPA).
Connector is 1/4".Adapter no.8 and no.9 are with tube connector and can be used together with the tube.
| No. |
Type |
|
L (mm) |
diameter |
| 1 |
HAPA_G 600/10 |
|
600 |
10 |
| 2 |
HAPA_G 200/10 |
|
200 |
10 |
| 3 |
HAPA_G 090/10 |
|
90 |
10 |
| 4 |
HAPA_G 130/06 |
|
130 |
6 |
| 5 |
HAPA_W 250/10 |
30° |
250 |
10 |
| 6 |
HAPA_W 200/10 |
30° |
200 |
10 |
| 7 |
HAPA_SW 130/10 |
30° |
130 |
10 |
| 8 |
HAPA_SW 135/8 |
135° |
- |
8 |
| 9 |
HAPA_SD 130/8 |
180° |
- |
8 |
|
Web hosting | Website builder by Ninenic
