หน้าแรก บริษัท สินค้าตามการใช้งาน Sitemap/ คู่มือ /FAQ/  ติดต่อ / สมัครงาน
 English
-A +A
ข้อมูลบริษัท
แผนที่
ห้องแสดงสินค้า
งานตู้แช่เย็น
งานห้องเย็น
งานห้องเย็นอุตสาหกรรม
แนะนำการใช้งานสินค้า
Site Map
คำถามบ่อยฯ / FAQ
เวบไซท์ Link
XWEB Sites (เฉพาะพนักงาน)
คู่มือ Dixell
Catalogues
สนใจติดต่อ
สมัครงาน
 www.dixellasia.com
  Search   
 








activTek - INDUCT2000
 

Description:
  • Duct or plenum installed natural air system
  • Discreet or concealed installation
  • 100/277 volt optional installation
  • UV bulb monitoring indicator included
  • Low maintenance – no cleaning required
Applications:
  • HVAC systems with accessible ducts
  • Residential homes
  • Apartments
  • Small offices
  • Elevators

The Technology:

The activTek INDUCT 2000 substantially reduces odors, visible smoke in the air, and microbial populations on surfaces*,
utilizing the patent pending ActivePure technology.

ActivePure consists of a special UV light and photocatalyst target, creating an Advanced Oxidation Process containing
several friendly oxidizers.

*Published scientific studies conducted on behalf of activTek by Dr. James Marsden at Kansas State University demonstrated that activTek’s ActivePure® technology substantially reduces microbial populations on surfaces. The study’s results are being provided solely for informational purposes. The study’s results have not been reviewed by the FDA, EPA or any other governmental agency. Our products are not medical devices and are not intended to diagnose, treat, or cure any disease. We make no claims and no claims should be inferred as to the efficacy of our products to sanitize, disinfect or kill germs or other antimicrobials.


Specifications:

Electrical: 100/277 VAC, 50/60 HZ 0.17A 19 watts*
Mechanical: UV bulb monitoring system install, safety interlock switch installed
Dimensions: 9.62" H x 9.62" W x 11.25" D (24.5cm L x 24.5cm W x 28.5cm D)
Weight: 3 pounds (1.2 kilograms)
Max temp: 200oF
*Based on nominal line voltage

The activTek INDUCT 2000 is ideally applicable to situations in which accessible ducts already exist or will be installed and where low maintenance, no cleaning, or discreet installation might also be an advantage.

Applications list:
  • Residential homes
  • Small offices
  • Nursing homes
  • Efficiency apartments

Installation Details



activTek INDUCT 2000 can be installed in any HVAC system directly into the plenum or directly above the air handler in remote or “down stream” locations.

If multiple units are installed in the same plenum area, stagger the installation so all units incur direct air flow.
1. An approximate 4" (10.16 cm) opening will need to be cut into the existing ductwork to install the unit properly.
2. Unit should be installed after the air handler in the HVAC system.
3. The ductwork around the installation area should be clean and dry to ensure proper adhesion of the gasket materials and any tape used.
  • Installation must be by a licensed HVAC professional.

Download Product Specification (PDF)
 
 


หน้าแรก | บริษัท | สินค้าตามการใช้งาน | Sitemap/ คู่มือ /FAQ/  | ติดต่อ / สมัครงาน  
  Web hosting | website builder |เว็บไซต์สำเร็จรูป by ninenic ©Copyright 2002-2018 All rights reserved.
บริษัท ดิคเซลล์ (เอเซีย) จำกัด
2893, 2895 ถนนพัฒนาการ (ซอยพัฒนาการ 53/1 เยื้อง เขตสวนหลวง) เขตสวนหลวง กรุงเทพฯ 10250
Tel : 02 722 0245-9 Fax: 0 2320 2520
Email : dixell@dixellasia.com