CONTROLLERS FOR COMPRESSOR RACK UP TO 15 COMPRESSORS/FANS 


• Controllers for compressor rack up to 15 compressors/fans
• Up to: eight probe inputs
• Up to: 15 configurable relays
• Up to: 23 configurable d.i.
• Two analogue outputs for frequency compressors
• Two analogue outputs for inverter for fans
• Proportional band or dead band control
• Temperature and pressure display depending on the gas (Freon, NH3, CO2, ...)
• Reduced set point for energy saving management
• Hourly run time signals for maintenance
• Dynamic set point for energy saving
• Sub-cooling management
• Standard communication protocol ModBUS-RTU
• Hot key or Prog tool kit connector for a quick and easy programming

XC1000D models can manage different compressor types:
• Scroll
• Semi-hermetic
• Multi stages
• Different power
• Screw (coming soon)

XC1008D Digital controller for simultaneous management of up to 8 compressors and fans
XC1011D Digital controller for simultaneous management of up to 11 compressors and fans
XC1015D Digital controller for simultaneous management of up to 15 compressors and fans
VGC810   Remote keyboard with LCD graphic display and interface dedicated to the management of compressor racks by means of  XC1000D controllers (IP65 front protection)

 
FEATURES XC1008D XC1011D XC1015D VGC810
Display LCD on VGC810 LCD on VGC810 LCD on VGC810 LCD - 240x96pixels
Power supply 24Vac/dc (from TF10D) 24Vac/dc (from TF20D) 24Vac/dc (from TF20D) LCD - 240x96pixels
Probe inputs 
Suction 1  NTC, PTC, 4-20mA, 0-5V NTC, PTC, 4-20mA, 0-5V NTC, PTC, 4-20mA, 0-5V  
Suction 2    NTC, PTC, 4-20mA, 0-5V NTC, PTC, 4-20mA, 0-5V  
Condensing NTC, PTC, 4-20mA, 0-5V NTC, PTC, 4-20mA, 0-5V NTC, PTC, 4-20mA, 0-5V  
Condensing 2   NTC, PTC, 4-20mA, 0-5V NTC, PTC, 4-20mA, 0-5V  
Auxiliary NTC, PTC NTC, PTC NTC, PTC  
Auxiliary 2 NTC, PTC NTC, PTC NTC, PTC  
Auxiliary 3   NTC, PTC NTC, PTC  
Auxiliary 4   NTC, PTC NTC, PTC  
Digital inputs 
Low pressure switch 1 1 1  
Low pressure switch 2   1 1  
High pressure switch 1 1 1  
High pressure switch 2   1 1  
Alarm 8 11 15  
Configurables 4 4 1  
Relay outputs 
Loads 5 x 7A config 11 x 7A config 15 x 7A config  
Alarms 2 x 8A config 2 x 8A 2 x 8A  
Other outputs
Inverter-compressor 4-20mA/0-10V option 2x4-20mA/0-10V option 2x4-20mA/0-10V option  
Inverter-fans 4-20mA/0-10V option 2x4-20mA/0-10V option 2x4-20mA/0-10V option  
Hot Key/Prog Tool Kit present present present  
Visokey       present
Serial RS485 RS485 RS485  
Other
Remote keyboard VGC810 VGC810 VGC810  
Alarms last 100 last 100 last 100  
Buzzer on keyboard on keyboard on keyboard option
 
Datasheet Download
XC1000 Series 

Manual Download
XC1008D
XC1011D
XC1015D

Dimension & Cut out Download
D: 10 DIN Rail